Integration In Control System - Hirschmann RS20 User Manual

EtherNet/IP

2.1 Integration in Control System

After installing and connecting the Switch, you configure it according to the
"Basic Configuration" user manual. Then:
Use the Web-based interface in the Switching:Multicasts dialog to
check whether the IGMP Snooping is activated.
Use the Web-based interface in the Advanced:Industry Protocols
dialog to check whether EtherNet/IP is activated.
Use the Web-based interface in the Advanced:Industry Protocols
dialog to load the EDS (= EtherNet/IP configuration file) and the Icon onto
your local computer.
Note: If EtherNet/IP and the Router function are enabled concurrently mal-
functions of EtherNet/IP may occur, e.g. in conjunction with „RS Who".
Disable Router function via Web-based Interface:
Dialog Routing:Global.
Disable Router function via Command Line Interface:
in configuration mode with the command no ip routing.
14
2.1 Integration in Control System
Industrial Protocols
Release 5.0 04/09