Access to the user interfaces
1.1 System Monitor
The system monitor enables you to
select the software to be loaded
perform a software update
start the selected software
shut down the system monitor
delete the configuration saved and
display the boot code information.
Starting the System Monitor
Prerequisites
Terminal cable for connecting the device to your PC (available as an
optional accessory).
PC with VT100 terminal emulation (such as PuTTY) or serial terminal
Perform the following work steps:
Use the terminal cable to connect the V.24 port of the device with the
"COM" port of the PC.
Start the VT100 terminal emulation on the PC.
Define the following transmission parameters:
– Speed: 9600 Baud
– Data: 8 bit
– Parity: None
– Stopbit: 1 bit
– Flow control: None
Speed
9,600 Baud
Data
8 bit
Parity
None
Stopbit
1 bit
Handshake
Off
Table 1:
Data transfer parameters
14
1.1 System Monitor
UM BasicConfig L2E
Release 8.0 05/2013