Set Igmp; Set Igmp Automatic-Mode - Hirschmann RS20 Reference Manual

4.5.8

set igmp

This command enables IGMP Snooping on a selected interface.
Default
enabled
Format
set igmp
Mode
Interface Config
no set igmp
U
This command disables IGMP Snooping on a selected interface.
Format
no set igmp
Mode
Interface Config
4.5.9

set igmp automatic-mode

If enabled, this port is allowed to be set as static query port automatically, if
the LLDP protocol has found a switch or router connected to this port. Use
the command's normal form to enable the feature, the 'no' form to disable it.
Default
disabled
Format
set igmp automatic-mode
Mode
Interface Config
CLI L2B
Release 4.0 11/07
4.5 Device Configuration Commands
105