Syslog Commands; Logging Buffered - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4 Syslog Commands

This section provides a detailed explanation of the Syslog commands. The
commands are divided into two functional groups:
D
Show commands display spanning tree settings, statistics, and other in-
formation.
D
Configuration Commands configure features and options of the device.
For every configuration command there is a show command that displays
the configuration setting.

4.4.1 logging buffered

This command enables logging to an in-memory log where up to 128 logs are
kept.
Default
disabled
Format
logging buffered
Mode
Global Config
no logging buffered
U
This command disables logging to in-memory log.
Format
no logging buffered
92
4.4 Syslog Commands
CLI L2B
Release 4.0 11/07