Syslog - Hirschmann RS20 Reference Manual

Diagnostics

7.1 Syslog

The "Syslog" dialog enables you to additionally send to one or more syslog
servers, the events that the device writes to its trap log or event log. You can
switch the function on or off, and you can manage a list of up to 8 syslog
server entries. You also have the option to specify that the device informs
various syslog servers, depending on the minimum "severity" (level to report)
of the event.
Additionally, you can also send the SNMP requests to the device as events
to one or more syslog servers. Here you have the option of treating GET and
SET requests separately, and of assigning a "severity" to the requests to be
logged.
Note: You will find the actual events that the device has logged in the "Trap
Log" dialog (see on page 184 "Trap log")
"Event Log"). The device evaluates SNMP requests as events if you have
activated "Log SNMP Set/Get Request"
Parameters Meaning
"Operation" Switches the syslog function for this
Frame device "On" or "Off"
"SNMP Logging" Settings for sending SNMP requests to
Frame the device as events to the list of syslog
servers.
Log SNMP Get Creates events for the syslog for SNMP
Request Get requests with the specified
"severity".
Severity (for logs of Specifies the level for which the device
SNMP Get creates the event "SNMP Get Request
Requests) received" for the list of the syslog
servers.
Table 113:Syslog and SNMP Logging settings
180
and in the log file
(see table 114).
Possible values
On
Off
Active
inactive
debug
informational
notice
warning
error
critical
alert
emergency
7.1 Syslog
(see on page 211
Default
setting
Off
inactive
notice
RM GUI L2E
Release 8.0 05/2013