Syslog - Hirschmann RS20 User Manual

Operation Diagnosis

9.11 Syslog

The device enables you to send messages about important device-internal
events to one or more syslog servers (up to 8). Additionally, you can also
include SNMP requests to the device as events in the syslog.
Note: You will find the actual events that the device has logged in the "Event
Log" (see on page 188 "Event Log")
"Reports"), a HTML page with the title "Event Log".
 Select the Diagnostics:Syslog dialog.
 Activate the syslog function in the "Operation" frame.
 Click on "Create"
 In the "IP Address" column, enter the IP address of the syslog server
to which the log entries should be sent.
 In the "Port" column, enter the UDP port of the syslog server at which
the syslog receives log entries. The default setting is 514.
 In the "Minimum level to report" column, you enter the minimum level
of seriousness an event must attain for the device to send a log entry
to this syslog server.
 In the "Active" column, you select the syslog servers that the device
takes into account when it is sending logs.
UM BasicConfig L2E
Release 8.0 05/2013
and in the log file
9.11 Syslog
(see on page 183
185