Remove The Sas Drive Signal Cable - Oracle netra X5-2 Service Manual

No. Description
2 USB board cable
3 Backplane power cable
4 SAS 4-7 drive signal cable
5 DVD SATA cable
6 Backplane data cable
7 NVMe B drive cable (optional)
8 LED board cable
9 SAS 0-3 drive signal cable
10 NVMe A drive cable (optional)
Related Information
"Component Locations (Storage, Power, and Fan Modules)" on page 14
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■

Remove the SAS Drive Signal Cable

Removing a cable is a cold-service operation. You must power off the server before you remove
the cable.
1. Determine which cable to remove.
See "System Cable Configuration" on page
2. Consider your next step.
If you have not prepared for service, do so now.
■
See "Preparing for Service" on page
Remove the SAS Drive Signal Cable
Links
"Install the PDB Signal Cable" on page 169
"Remove the USB Board" on page 219
"Install the USB Board" on page 223
"Remove the Backplane Power Cable" on page 161
"Install the Backplane Power Cable" on page 163
"Remove the SAS Drive Signal Cable" on page 157
"Install the SAS Drive Signal Cable" on page 158
"Remove the DVD SATA Cable" on page 164
"Install the DVD SATA Cable" on page 166
"Remove the Backplane Data Cable" on page 159
"Install the Backplane Data Cable" on page 160
Refer to the Oracle 1.6TB NVMe SSD Documentation Library
"Remove the LED Board" on page 212
"Install the LED Board" on page 215
"Remove the SAS Drive Signal Cable" on page 157
"Install the SAS Drive Signal Cable" on page 158
Refer to the Oracle 1.6TB NVMe SSD Documentation Library
156.
61.
Servicing the System Cables 157