Oracle Ilom Log Entry Filters - Oracle netra X5-2 Service Manual

Display Oracle ILOM Log Entries
See "Access the SP (Oracle ILOM)" on page
2. Display the Oracle ILOM event log.
-> show /SP/logs/event/list Class==class Type==type
where class and type are chosen from the table in
Filters" on page
For example, to display log entries pertaining to faults:
-> show /SP/logs/event/list Class==Fault Type==Fault
Event
ID
----- ------------------------ -------- -------- --------
1741
Fault detected at time = Tue Mar 6 20:13:05 2012. The suspect component:
/SYS/PS1 has fault.chassis.power.ext-fail with probability=100. Refer to
http://www.sun.com/msg/SPX86-8003-73 for details.
->
For this example, power supply 1 had a fault. A URL is provided for more information about
the fault.
Related Information
"Enable Oracle ILOM Legacy Targets" on page 35
■
"Oracle ILOM Log Entry Filters" on page 36
■
"Display Active Power Consumption" on page 37
■
"Display Information About User Sessions" on page 38
■
"Display the NET MGT Configuration Properties" on page 39
■
"Display the SP Firmware Version" on page 40
■

Oracle ILOM Log Entry Filters

When you display the Oracle ILOM log, you can filter the output to specific classes and types
of entries using combinations of the Class and Type parameters. See
Log Entries" on page
displayed.
Parameters
Class==Audit Type==Log
36 Netra Server X5-2 Service Manual • October 2016
36.
Date/Time
Tue Mar 6 20:13:05 2012 Fault
35. This table describes the combinations and the entries that are
28.
"Oracle ILOM Log Entry
Class Type Severity
Fault critical
Entries Displayed
Commands that result in a configuration change. Description
includes user, command, command parameters, and success or
failure.
"Display Oracle ILOM