Remove The Usb Flash Drive - Oracle netra X5-2 Service Manual

Remove the USB Flash Drive

be visible through the grille of the back panel of the chassis. See
(Service)" on page
The LED of the USB flash drive flashes to represent read/write activity:
Rapid flashing identifies read activity.
■
Slower, rhythmic flashing identifies write activity.
■
Related Information
"Remove the USB Flash Drive" on page 150
■
"Front Panel LEDs" on page 31
■
"Rear Panel LEDs" on page 33
■
Remove the USB Flash Drive
Removing the USB flash drive is a cold-service operation. You must power off the server before
you remove the USB flash drive.
Consider your first step.
1.
If you have not prepared for service, do so now. See
■
If you are removing the USB flash drive as part of another component's removal or
■
installation procedure, go to
150 Netra Server X5-2 Service Manual • October 2016
18.
Step 2.
"Rear Panel Components
"Preparing for Service" on page 61.