Install The Battery - Oracle netra X5-2 Service Manual

Install the Battery

Installing the battery is a cold-service operation. You must power off the server before installing
the battery.
1. Consider your first step.
If you are replacing the battery, remove the faulty or obsolete battery first, then return to this
■
procedure,
If you are installing the battery as part of another component's removal or installation
■
procedure, go to
2. Position the battery where it will install into the receptacle.
The positive (+) side of the battery faces left.
Press the battery into the receptacle until you hear a click.
3.
4. Consider your next step.
If you installed the battery as part of a replacement operation, go to
■
If you installed the battery as part of another component's removal or installation procedure,
■
return to that procedure. See
assistance.
Install the Air Duct.
5.
See "Install the Air Duct" on page
Finish the installation procedure.
6.
See "Returning the Server to Operation" on page
Related Information
"Remove the Battery" on page 145
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■
Step 2. See "Remove the Battery" on page
Step 2.
"Component Service Task Reference" on page 65
249.
145.
Step
247.
Servicing the Battery
Install the Battery
5.
for
147