Remove a SAS Drive
7.
Press the release button and pivot the release lever open to the right.
8.
Grasp the release lever and pull the drive out of the chassis.
Set the drive aside.
9.
Repeat from
10.
Consider your next step.
11.
If you removed a drive as part of a replacement operation, install a new drive. See
■
SAS Drive" on page
If you removed a drive as part of another component's removal or installation procedure,
■
return to that procedure. See
assistance.
If you are not replacing the drive, install a drive filler panel in its place. See
■
Drive" on page
98
Netra Server X5-2 Service Manual • October 2016
Step 5
for any additional drives to be removed.
99.
"Component Service Task Reference" on page 65
99.
"Install a
for
"Install a SAS
Need help?
Do you have a question about the netra X5-2 and is the answer not in the manual?