Remove The Pdb - Oracle netra X5-2 Service Manual

6. If you are unable to determine if the PDB is faulty, seek further information.
See "Detecting and Managing Faults" on page
Related Information
"Remove the PDB" on page 239
■
"Verify the PDB" on page 245
■
"Detecting and Managing Faults" on page 21
■

Remove the PDB

Removing the PDB is a cold-service operation. You must power off the server before you
remove the PDB.
Consider your first step.
1.
If you have not prepared for service, do so now. See
■
If you are removing the PDB as part of another component's removal or installation
■
procedure, go to
2. Review this information and complete these prerequisites in this order.
"Remove a Power Supply" on page 122
■
Remove both power supplies.
"Remove the Filter" on page 89
■
"Remove a Fan Module" on page 132
■
Remove all fan modules.
"Remove the Fan Tray" on page 80
■
"Rotate the Drive Cage to the Service Position" on page 82
■
"Remove the USB Flash Drive" on page 150
■
"Remove the Air Duct" on page 83
■
"Remove a DIMM" on page 187
■
Remove all DIMMs.
"Remove the PSU Duct" on page 87
■
"Remove the Motherboard" on page 230
■
Step 2.
21.
"Preparing for Service" on page
Remove the PDB
61.
Servicing the PDB 239