Display Component Power Consumption - Oracle netra X5-2 Service Manual

Display Component Power Consumption

3. Type.
-> show target value
where these component voltages have these targets:
Component voltage
CPU Px DIMM voltage
Power supply PSx input voltage
Power supply PSx main voltage supplied
Related Information
"Display FRUID and Fault State for Specific Components" on page 52
■
"Display Component Power Consumption" on page 54
■
"Display Component Temperatures" on page 55
■
"Display Component Fan Speeds" on page 56
■
"Display Component LED State" on page 57
■
Display Component Power Consumption
Note -
Access Oracle ILOM.
1.
See "Access the SP (Oracle ILOM)" on page
2. If you have not already done so, enable Oracle ILOM legacy targets.
See "Enable Oracle ILOM Legacy Targets" on page
3. Type.
-> show target
where target is from the table in
Consumption" on page
Related Information
"Display FRUID and Fault State for Specific Components" on page 52
■
"Display Component Voltages" on page 53
■
"Oracle ILOM Legacy Targets for Component Power Consumption" on page 55
■
54 Netra Server X5-2 Service Manual • October 2016
For the chassis, CPUs, DIMMs, and fans, a summary of power consumed is displayed.
55.
Target
/SYS/MB/Px/V_DIMM
/SYS/PSx/V_IN
/SYS/PSx/V_12V
28.
35.
"Oracle ILOM Legacy Targets for Component Power
Comment
where x is either 0 or 1
where x is either 0 or 1
where x is either 0 or 1