Oracle netra X5-2 Service Manual page 25

Diagnostic applications – These software programs perform tests on the hardware
■
components.
UEFI Diagnostics - The UEFI diagnostics can test and detect problems on all
■
processors, memory, disk drives, and network ports. The diagnostics are used on newer
Oracle systems, such as this server.
Refer to the Oracle x86 Servers Diagnostics, Applications, and Utilities Guide for
Servers with Oracle ILOM 3.1 and Oracle ILOM 3.2.x at
goto/x86AdminDiag/docs
Oracle VTS - The Oracle VTS software provides a comprehensive diagnostic tool
■
that tests and validates Oracle's Sun hardware by verifying the connectivity and proper
functioning of most hardware controllers and devices. Oracle VTS requires the Oracle
Solaris operating system and is installed separately.
For Oracle VTS software and documentation go to
E19719-01/index.html.
Related Information
"Tools Available When Power Cords Are Attached" on page 25
■
"Tools Available on Initial Power Up" on page 26
■
"Tools Available When the BIOS Menu Is Available" on page 26
■
"Tools Available When the OS Boots" on page 27
■
"Tools Available When the OS Is Running" on page 28
■
"Tools Available When Power Cords Are Attached" on page 25
■
Tools Available When Power Cords Are Attached
In this server state, standby voltage is applied and constant throughout the chassis.
Tool
Status LEDs:
■ Power supply
■ Chassis
Oracle ILOM /SP targets
Oracle ILOM logs
Related Information
"Diagnostic Tools" on page 24
■
"Tools Available on Initial Power Up" on page 26
■
for information.
Links
"Rear Panel LEDs" on page 33
"Front Panel LEDs" on page 31
"Troubleshooting (Oracle ILOM /SP Targets)" on page 34
"Display Oracle ILOM Log Entries" on page 35
Understanding Diagnostics
http://www.oracle.com/
http://docs.oracle.com/cd/
Detecting and Managing Faults 25