Remove A Pcie Card - Oracle netra X5-2 Service Manual

3. Verify that a PCIe card is identified.
-> show /System/PCI_Devices/Add-on/Device_x
where x is the slot number where the PCIe card is installed.
If a PCIe card cannot be identified, replace it. See
Verify that a PCIe card is faulty.
4.
If a PCIe card is faulty, you will see /SYS/MB/PCIEy under the Value heading:
For example:
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
...
->
wherey is 0 to 6.
If a PCIe card is faulty, replace it. See
If a FRU value different from /SYS/MB/PCIEy is displayed, see
Reference" on page 65
5.
Use the Oracle ILOM faultmgmt shell to identify the faulty component.
See "Display Faults (faultmgmt Shell)" on page
Check the Fault class and Description fields for more information.
If a PCIe card is faulty, replace it. See
6. If you are unable to determine if a PCIe card is faulty, seek further information.
See "Detecting and Managing Faults" on page
Related Information
"Remove a PCIe Card" on page 139
■
"PCIe Card Configuration" on page 138
■
"Verify a PCIe Card" on page 142
■
"Detecting and Managing Faults" on page 21
■

Remove a PCIe Card

Removing a PCIe card is a cold-service operation. You must power off the server before you
remove the PCIe card.
| Property
| fru
"Remove a PCIe Card" on page
to identify which component is faulty.
"Remove a PCIe Card" on page
"Remove a PCIe Card" on page
| Value
| /SYS/MB/PCIE1
139.
"Component Service Task
48.
139.
21.
Servicing PCIe Cards
Remove a PCIe Card
139.
139