Oracle netra X5-2 Service Manual page 229

/System/Networking/Ethernet_NICs/Ethernet_NIC_0
Targets:
Properties:
health = OK
health_details = -
...
->
where x is the number of the interface, from 0 to 3.
If the health_details property identifies the interface as faulty, consider replacing the
motherboard. See "Remove the Motherboard" on page
6. Verify that the motherboard is faulty.
If the motherboard is faulty, you will see /SYS/MB, /SYS/MB/P0, or /SYS/MB/P1 under the Value
heading.
For example:
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
...
->
If the motherboard is faulty, replace it. See
■
If a FRU value different from /SYS/MB, /SYS/MB/P0, or /SYS/MB/P1 is displayed, see
■
"Component Service Task Reference" on page 65
7.
Use the Oracle ILOM faultmgmt shell to identify the faulty component.
See "Display Faults (faultmgmt Shell)" on page
Check the Fault class and Description fields for more information.
If the motherboard is faulty, replace it. See
8. Within the Oracle ILOM interface, display the power currently consumed.
-> show /SYS/VPS value
/SYS/VPS
Properties:
value = 159.175 Watts
->
If the power displayed is unreasonable or none at all, replace the motherboard. See
the Motherboard" on page
9. If you are unable to determine if the motherboard is faulty, seek further
information.
| Property
| fru
"Remove the Motherboard" on page
230.
Determine if the Motherboard Is Faulty
230.
| Value
| /SYS/MB
"Remove the Motherboard" on page
to identify which component is faulty.
48.
Servicing the Motherboard
230.
230.
"Remove
229