Remove all fan modules.
"Remove the Fan Tray" on page 80
■
4.
Disconnect the DVD SATA cable from the drive backplane connector.
See
"System Cable Configuration" on page
5.
Disconnect the DVD SATA cable from the motherboard connector.
Set the cable aside.
6.
7.
Consider your next step.
If you removed the cable as part of a replacement operation, install a new cable.
■
See
"Install the DVD SATA Cable" on page
If you removed the cable as part of another component's removal or installation procedure,
■
return to that procedure.
See
"Component Service Task Reference" on page 65
Related Information
"Install the DVD SATA Cable" on page 166
■
"Component Locations (Storage, Power, and Fan Modules)" on page 14
■
"Preparing for Service" on page 61
■
156.
166.
for assistance.
Servicing the System Cables
Remove the DVD SATA Cable
165