Install A Fan Module - Oracle netra X5-2 Service Manual

3. On the fan module to be replaced, pull the green band straight up and lift the fan
module out of the chassis.
4. Set the fan module aside.
Repeat from
5.
Consider your next step.
6.
If you removed a fan module as part of a replacement operation, install a new fan module.
■
See "Install a Fan Module" on page
If you removed a fan module as part of another component's removal or installation
■
procedure, return to that procedure. See
for assistance.
Related Information
"Locate a Faulty Fan Module" on page 131
■
"Install a Fan Module" on page 133
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■

Install a Fan Module

Installing a fan module is a cold-service operation. You must power off the server before
installing the fan module.
Step 3 for any additional fan modules to be removed.
133.
"Component Service Task Reference" on page 65
Install a Fan Module
Servicing Fan Modules 133