Oracle netra X5-2 Service Manual page 100

Install a SAS Drive
4. Align the drive with the slot where it installs into the chassis.
The connector is at the rear of the drive and the release button is on the left.
5. Press on the drive to slide the drive into the chassis until the release lever
moves slightly inward.
6. Press the release lever fully closed with a click, securing the drive into the
chassis.
7. Repeat from
installing.
8. Consider your next step.
If you installed a drive as part of a replacement operation, go to
■
100 Netra Server X5-2 Service Manual • October 2016
Step 3 through Step 6 for any additional drives that you are
Step 9.