Oracle netra X5-2 Service Manual page 222

Remove the USB Board
5. Disconnect the cable from the motherboard.
Gently lift the USB board and cable out of the chassis.
6.
Set the USB board aside.
7.
Consider your next step.
8.
If you removed the USB board as part of a replacement operation, install a new USB board.
■
See
If you removed the USB board as part of another component's removal or installation
■
procedure, return to that procedure. See
for assistance.
Related Information
"Install the USB Board" on page 223
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■
222 Netra Server X5-2 Service Manual • October 2016
"Install the USB Board" on page 223.
"Component Service Task Reference" on page 65