Display Component Led State; Oracle Ilom Legacy Targets For Led States - Oracle netra X5-2 Service Manual

Component
Related Information
"Display FRUID and Fault State for Specific Components" on page 52
■
"Display Component Voltages" on page 53
■
"Display Component Power Consumption" on page 54
■
"Display Component Temperatures" on page 55
■
"Display Component LED State" on page 57
■

Display Component LED State

1. Access Oracle ILOM.
See "Access the SP (Oracle ILOM)" on page
If you have not already done so, enable Oracle ILOM legacy targets.
2.
See "Enable Oracle ILOM Legacy Targets" on page
3. Type.
-> show target value
where target is from the table in
States" on page 57.
Related Information
"Display FRUID and Fault State for Specific Components" on page 52
■
"Display Component Voltages" on page 53
■
"Display Component Power Consumption" on page 54
■
"Display Component Temperatures" on page 55
■
"Display Component Fan Speeds" on page 56
■
"Oracle ILOM Legacy Targets for LED States" on page 57
■

Oracle ILOM Legacy Targets for LED States

Use the Oracle ILOM show command with these targets to display the states of status LEDs for
hardware components. See
Target
28.
"Oracle ILOM Legacy Targets for LED
"Display Component LED State" on page
Display Component LED State
Comment
where y is either 0 or 1
35.
57.
Detecting and Managing Faults 57