Display The Net Mgt Configuration Properties - Oracle netra X5-2 Service Manual

role = aucro
starttime = Wed Mar 14 20:15:36 2012
type = shell
mode = normal
->
Related Information
"Enable Oracle ILOM Legacy Targets" on page 35
■
"Display Oracle ILOM Log Entries" on page 35
■
"Oracle ILOM Log Entry Filters" on page 36
■
"Display Active Power Consumption" on page 37
■
"Display the NET MGT Configuration Properties" on page 39
■
"Display the SP Firmware Version" on page 40
■

Display the NET MGT Configuration Properties

1. Access Oracle ILOM.
See "Access the SP (Oracle ILOM)" on page
2. Display the parameters configured for the SP to communicate over the network.
-> show -d properties /SP/network
/SP/network
Properties:
commitpending = (Cannot show property)
dhcp_clientid = none
dhcp_server_ip = none
ipaddress = 10.153.113.85
ipdiscovery = static
ipgateway = 10.153.113.1
ipnetmask = 255.255.255.0
...
state = enabled
->
Related Information
"Enable Oracle ILOM Legacy Targets" on page 35
■
"Display Oracle ILOM Log Entries" on page 35
■
"Oracle ILOM Log Entry Filters" on page 36
■
"Display Active Power Consumption" on page 37
■
"Display Information About User Sessions" on page 38
■
"Display the SP Firmware Version" on page 40
■
Display the NET MGT Configuration Properties
28.
Detecting and Managing Faults 39