Servicing The Battery; Remove The Battery - Oracle netra X5-2 Service Manual

Servicing the Battery

The battery provides continuous backup power for the SP, BIOS, and time-of-day circuits. The
battery is located in the middle of the motherboard. See
Memory, and PCIe Cards)" on page
Description
Replace the faulty battery.
Remove the battery as part of another
component's service operation.
Install the battery as part of another
component's service operation.
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 21
■
"Component Service Task Reference" on page 65
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■

Remove the Battery

Removing the battery is a cold-service operation. You must power off the server before you
remove the battery.
1. Consider your first step.
If you have not prepared for service, do so now. See
■
If you are removing the battery as part of another component's removal or installation
■
procedure, go to
2. Remove the air duct.
16.
Links
"Remove the Battery" on page 145
"Install the Battery" on page 147
"Remove the Battery" on page 145
"Install the Battery" on page 147
Step 2.
"Component Locations (Motherboard,
"Preparing for Service" on page
Servicing the Battery
61.
145