Oracle Ilom Legacy Targets For Component Power Consumption; Display Component Temperatures - Oracle netra X5-2 Service Manual

"Display Component Temperatures" on page 55
■
"Display Component Fan Speeds" on page 56
■
"Display Component LED State" on page 57
■
Oracle ILOM Legacy Targets for Component
Power Consumption
Use the Oracle ILOM show command with these targets to display component power consumed
as a summary or a timeline, and the power going into and out of the power supplies. See
"Display Component Power Consumption" on page
Component power
Chassis power summary
Chassis power timeline
CPU power summary
CPU power timeline
DIMM power summary
DIMM power timeline
Fan power summary
Fan power timeline
Power supply PSx drawn
Power supply PSx supplied
Related Information
"Oracle ILOM Legacy Targets for Component FRUID and Fault States" on page 53
■
"Display Component Power Consumption" on page 54
■
"Oracle ILOM Legacy Targets for LED States" on page 57
■

Display Component Temperatures

1. Access Oracle ILOM.
See "Access the SP (Oracle ILOM)" on page
If you have not already done so, enable Oracle ILOM legacy targets.
2.
See "Enable Oracle ILOM Legacy Targets" on page
54.
Target
/SYS/VPS/history
/SYS/VPS/history/1/list
/SYS/VPS_CPUS/history
/SYS/VPS_CPUS/history/1/list
/SYS/VPS_MEMORY/history
/SYS/VPS_MEMORY/history/1/list
/SYS/VPS_FANS/history
/SYS/VPS_FANS/history/1/list
/SYS/PSx/P_IN value
/SYS/PSx/P_OUT value
28.
35.
Display Component Temperatures
Comment
14-day history
14-day history
14-day history
14-day history
where x is either 0 or 1
where x is either 0 or 1
Detecting and Managing Faults 55