Oracle netra X5-2 Service Manual page 168

Remove the PDB Signal Cable
Remove all fan modules.
"Remove the Fan Tray" on page 80
■
"Rotate the Drive Cage to the Service Position" on page 82
■
"Remove the Air Duct" on page 83
■
"Remove the PSU Duct" on page 87
■
4. Disconnect the PDB signal cable from the PDB and the motherboard connector.
5. Set the cable aside.
Consider your next step.
6.
If you removed the cable as part of a replacement operation, install a new cable.
■
See
If you removed the cable as part of another component's removal or installation procedure,
■
return to that procedure.
See
Related Information
"Install the PDB Signal Cable" on page 169
■
"Component Locations (Storage, Power, and Fan Modules)" on page 14
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■
168 Netra Server X5-2 Service Manual • October 2016
"Install the PDB Signal Cable" on page
"Component Service Task Reference" on page 65
169.
for assistance.