5.
Remove the two screws from each side bracket at the front of the posts.
6.
Lift the server from the rack and set it aside on an antistatic mat.
7.
Remove the top cover.
See
"Remove the Top Cover" on page
Related Information
"Prevent ESD Damage" on page 72
■
"Remove the Top Cover" on page 77
■
"Install the Top Cover" on page 257
■
"Safety Information" on page 62
■
Remove the Top Cover
Remove the server from the rack.
1.
See
"Removing the Server From the Rack" on page
77.
72.
Remove the Top Cover
Preparing for Service
77
Need help?
Do you have a question about the netra X5-2 and is the answer not in the manual?