Servicing CPUs
The Netra Server X5-2 is available in either a single-processor configuration or a dual-
processor configuration. The single-processor configuration cannot be upgraded to a
dual-processor configuration. The procedures in this chapter focus on the dual-processor
configuration. Replacing a single processor is the same in both configurations.
Use these procedures to service the CPUs.
"CPU Configuration" on page 195
■
"Locate a Faulty CPU" on page 196
■
"Remove a CPU" on page 198
■
"Install a CPU" on page 203
■
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 21
■
"Component Service Task Reference" on page 65
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■
CPU Configuration
This illustration shows the locations of Processor 0 and 1 in the dual-processor configuration.
In the single-processor configuration, P1 is not present, and its DIMM slots are filled with filler
panels.
Servicing CPUs
195