Oracle netra X5-2 Service Manual page 73

"Prevent ESD Damage" on page 72
■
Remove the Server From the 4-Post, 19-inch Rack
The steps to remove the server from a 4-post, 19-inch rack depend on the type of rack or rail kit.
The server is hard mounted with the hardmount rack kit, or the server is mounted with a sliding
rail kit.
1. Support the weight of the server for removal.
2. For the hardmount rack kit, remove the two screws securing each rear mount
support bracket.
Remove the Server From the 4-Post, 19-inch Rack
Preparing for Service 73