Install the DVD Drive
Install the DVD Drive
Installing the DVD drive is a hot-plug operation. You do not need to power off the server before
installing the DVD drive.
1.
Consider your first step.
If you are replacing the DVD drive, remove the faulty or obsolete DVD drive first, then
■
return to this procedure,
If you are installing the DVD drive as part of another component's removal or installation
■
procedure, go to
Extend the tab out from the underside of the DVD drive.
2.
Align the DVD drive to the location where it installs into the chassis.
3.
The DVD drive is oriented with the tab at the right front.
4.
Slide the DVD drive into the chassis.
116
Netra Server X5-2 Service Manual • October 2016
Step
2. See
"Remove the DVD Drive" on page
Step
2.
113.