Servicing The Filter; Remove The Filter - Oracle netra X5-2 Service Manual

Servicing the Filter

The filter traps larger particles from entering the server chassis. The filter is located at
the air intake end of the server. See
Modules)" on page
Description
Replace the faulty filter.
Remove the filter as part of another
component's service operation.
Install the filter as part of another component's
service operation.
Related Information
"Identifying Components" on page 13
■
"Detecting and Managing Faults" on page 21
■
"Component Service Task Reference" on page 65
■
"Preparing for Service" on page 61
■
"Returning the Server to Operation" on page 247
■

Remove the Filter

Removing the filter is a hot-swap operation. You do not need to power off the server before you
remove the filter.
Consider your first step.
1.
If you have not prepared for service, do so now. See
■
If you are removing the filter as part of another component's removal or installation
■
procedure, go to
"Component Locations (Storage, Power, and Fan
14.
Links
"Remove the Filter" on page 89
"Install the Filter" on page 91
"Remove the Filter" on page 89
"Install the Filter" on page 91
Step 2.
"Preparing for Service" on page
Servicing the Filter
61.
89