Remove a PCIe Card
Note -
1.
Determine which PCIe card to remove.
See
"Locate a Faulty PCIe Card" on page
Consider your next step.
2.
If you have not prepared for service, do so now. See
■
If you are removing a PCIe card as part of another component's removal or installation
■
procedure, go to
Swing the retainer to its fully open position and lift the PCIe card out of the
3.
socket.
4.
Set the PCIe card aside.
5.
Repeat from
6.
Consider your next step.
If you removed a PCIe card as part of a replacement operation, install a new PCIe card. See
■
"Install a PCIe Card" on page
140
Netra Server X5-2 Service Manual • October 2016
This procedure is the same for removing a filler panel.
Step
3.
Step 3
for any additional PCIe cards to be removed.
138.
"Preparing for Service" on page
141.
61.