Install The Battery - Oracle X8-2L Service Manual

To gain access to the battery, you might need to disconnect and move aside the
Note -
auxiliary signal cable to the disk backplane and the SAS cables to the Internal HBA. For more
information, see
Cables (FRU)" on page
Lift the battery up and out of its retainer.
3.
Related Information
"Install the Battery" on page 143
■

Install the Battery

1. Unpack the replacement battery.
2. Press the new battery into the battery retainer.
If disconnected during battery removal, reconnect the auxiliary signal cable to the disk
Note -
backplane and the SAS cables to the Internal HBA. For more information, see
Disk Backplane (FRU)" on page 159
"Servicing the Disk Backplane (FRU)" on page 159
189.
and "Servicing SAS Cables (FRU)" on page
Servicing the Battery (CRU)
Install the Battery
and "Servicing SAS
"Servicing the
189.
143