Troubleshooting And Repair; Fault Diagnosis With Warning Messages; T102 Warning Messages; M501-Trs Error Codes - Teledyne T102 Operation Manual

11. TROUBLESHOOTING and REPAIR

The operations outlined in this section must be performed by qualified
Please read the Troubleshooting and Repair section of the T101 Manual
(PN 07266) before attempting the following trouble shooting or repair
Risk of electrical shock. Some operations need to be carried out with the
analyzer open and running. Exercise caution to avoid electrical shocks and
electrostatic or mechanical damage to the analyzer. Do not drop tools into
the analyzer or leave those after your procedures. Do not shorten or touch
electric connections with metallic tools while operating inside the
analyzer. Use common sense when operating inside a running analyzer.

11.1.1. Fault Diagnosis with Warning Messages

11.1.1.1. T102 Warning Messages

11.1.1.2. M501-TRS Error Codes

07267B DCN6485
This section includes various troubleshooting and repair information supplemental to
that in the Troubleshooting and Repair section of the T101 manual (PN 07266).
maintenance personnel only.
The warning messages for the T102 are identical to those included in the Fault
Diagnosis with Warning Messages section in the T101 Manual (PN 07266) except that
there is no CONV TEMP WARNING.
The following error codes may appear on the temperature controller display of the
M501-TRS
CAUTION
procedures
WARNING
65