Snmp V1/V2C - Spectracom SecureSync 1200 User Reference Manual

2.14 Configuring Network Settings
Spectracom's private enterprise MIB files can be requested and obtained from the Spec
tracom Customer Service department via email at

2.14.8.1 SNMP V1/V2c

SNMP V1 is the first version of the SNMP protocol, as defined in the IETF (Internet Engineering
Task Force) RFCs (Request for Comments) number 1155 and 1157. SNMP V2c is the revised
protocol, but it also uses the V1 community based administration model.
Creating Communities
1.
Navigate to MANAGEMENT > NETWORK: SNMP Setup .
2.
In the SNMP V1/V2 panel click the PLUS icon in the top-right corner.
3.
The SNMP V1/V2c Settings for Access window will display:
4.
Enter the required information in the fields provided
82
techsupport@spectracom.com
Note: By default,
sysContact field of the SNMP Status panel of the SNMP Setup page.
The IP Version field provides a choice of IPv4, IPV6 or both IPv4 and IPv6 (=
default).
The choices offered below will change in context with the choice made in the IP
Version field.
techsupport@spectracom.com
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
.
is the address in the