Snmp Traps - Spectracom SecureSync 1200 User Reference Manual

Editing and Deleting Users
To edit or delete a user you have created:
1.
2.
3.
4.

2.14.8.3 SNMP Traps

SNMP traps allow for automatic event notification, and as such are one way to remotely mon
itor SecureSync's status.
SNMP traps indicate the status change that caused the trap to be sent and may also include one
or more objects, referred to as variable-bindings, or varbinds . A varbind provides a current
SecureSync data object that is related to the specific trap that was sent. For example, when a
Holdover trap is sent because SecureSync either entered or exited the Holdover mode, the trap
varbind will indicate that SecureSync is either currently in Holdover mode or not currently in
Holdover mode.
For testing purposes, a command line interface command is provided. This command,
testevent
erated. Refer to "CLI Commands" on page 492 for command details.
To define SNMP Traps (Notifications):
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
Navigate to MANAGEMENT > NETWORK: SNMP Setup .
Click the row of the SNMP V3 panel that displays the community you wish to edit or
delete. The cursor will change from an arrow icon to a pointing finger to indicate that
the entry is clickable.
The SNMP V3 Settings window will display:
Apply your changes and click Submit . OR: Click Delete to remove the User.
, allows one, several, or all of the traps defined in the SecureSync MIB to be gen
2.14 Configuring Network Settings
85