Spectracom SecureSync 1200 User Reference Manual page 108

2.15 Configuring NTP
The INFO icon opens a window showing the maximum per second traffic rate from
each.
The graphs maybe saved and downloaded (> ARROW icon), or deleted (> TRASH CAN
icon).
Note that this data is currently only displayed for NTP, and not for TimeKeeper NTP.
The Actions panel
... is in the top left-hand corner of the NTP screen comprises the following buttons:
Symmetric Keys : Click here to set up your symmetric keys for MD5 authentication. For
more information on Symmetric Keys, see "Configuring NTP Symmetric Keys" on
page 112.
Access Restrictions : Click here to view, change or delete access restrictions to the NTP
network. (See also "NTP Access Restrictions" on page 114.)
Fields in the NTP Access Restrictions table include:
View NTP Clients : Click here to reveal a table of all the clients your SecureSync is ser
vicing. (See also "Viewing NTP Clients" on page 94.)
Information for each client includes:
Restore Default NTP Configuration : Click here to restore SecureSync's NTP settings to
the factory default. Any settings you have created previously will be lost. See "Restoring
the Default NTP Configuration" on page 95.
The NTP Services panel
... is the second panel on the left-hand side of the NTP screen. It has two switches:
92
Type
IP Version
IP
IP Mask
Auth only
Enable Query
Client IP
Received Packets
Mode
Version
Restriction Flags
Avg Interval
Last Interval
CHAPTER •
2 SecureSync User Reference Guide Rev. 23