Viewing An Input/Output Signal State - Spectracom SecureSync 1200 User Reference Manual

2.
Navigate to the INTERFACES > OPTION CARDS drop-down menu, and click the list
entry of the option card identified above. The option card's Status Summary panel
opens:
3.
Click on the GEAR button next to the input or output you wish to configure (as verified in
Step 1 of this procedure). The Edit window of the input or output opens:
4.
Information about the configurable settings can be found in the corresponding option
card section, see "Option cards listed by their ID number" on page 14.
5.2.1.4

Viewing an Input/Output Signal State

To view if an input or output is currently enabled or disabled, go to the option card's Status
Summary panel:
SecureSync User Reference Guide
Note: If you have only one input or output of any type, SecureSync will
number that input or output 0. Additional inputs or outputs will be
numbered 1 or above.
APPENDIX
331