Spectracom SecureSync 1200 User Reference Manual page 364

APPENDIX
Figure 5-13:
Figure 5-14:
SecureSync Web UI, ≥ Version 5.0
Open a web browser, log in to the SecureSync Web UI, and navigate to INTERFACES >
OPTION CARDS : The new card will be displayed in the list.
If the card does not appear to be properly identified, proceed with the Software update
as described below, and then navigate to INTERFACES > OPTION CARDS again to con
firm the card has been detected.
If the card has been detected properly, proceed with the Software update as described
below to ensure SecureSync and the newly installed card are using the same, latest avail
able version.
Updating the System Software
Even if the newly installed option card has been detected, and even if the latest System Soft
ware version is installed on your SecureSync unit, you
both SecureSync,
348
Example STATUS/INPUTS page – SecureSync Web UI
Example STATUS/OUTPUTS page – SecureSync Web user interface
and
the option card are using the latest software:
must
(re-)install the software to ensure
SecureSync User Reference Guide