Troubleshooting - Keypad Is Locked; Troubleshooting - 1Pps, 10 Mhz Outputs - Spectracom SecureSync 1200 User Reference Manual

For additional information on troubleshooting GNSS reception issues with SecureSync, please
refer to the GNSS Reception Troubleshooting Guide , available
site.
5.1.7 Troubleshooting – Keypad Is Locked
The SecureSync front panel keypad can be locked in order to prevent inadvertent operation. It
can be locked and unlocked using either the keypad or the Web UI. When locked, the keypad
operation is disabled until it is unlocked using either of the two following processes:
To unlock the front panel keypad, using the keypad (locally), perform the following key
sequence:
To unlock the front panel keypad, using the Web UI (remotely):
1.
2.
3.
5.1.8 Troubleshooting – 1PPS, 10 MHz Outputs
If the 1PPS and/or the 10 MHz output(s) are not present, input power may not be applied. Or
SecureSync is not synchronized to its input references and Signature Control is enabled.
SecureSync User Reference Guide
Open the SecureSync Web UI, and navigate to MANAGEMENT > OTHER: Front
Panel .
Check the Lock Keypad box.
Click Submit .
here
on the Spectracom web
APPENDIX
323