Spectracom SecureSync 1200 User Reference Manual page 21

accessible from the main "Home" menu. To navigate through the menus, use the arrow keys to
highlight a selection and then press the ENTER button.
The main menu options and their primary functions are as follows:
Menu Tree
The front panel keypad and 4-line information display allow you to access the following func
tions:
Figure 1-2:
To modify a parameter, highlight the menu option and press the ENTER button. The "O" data is
the current old setting and the "N" data is the new setting. You can only change the "N" setting
in all menus. Use the UP and DOWN arrow keys to scroll through all possible parameter val
ues.
When editing a sequence of numbers, use the LEFT and RIGHT arrow keys to select other digits.
When the parameter is correct, press ENTER to load the new value. You will be asked to con
firm the setting change. Press ENTER to accept or BACK to cancel the parameter change. All
entered values are stored in memory and restored after a power cycle.
CHAPTER •
1 SecureSync User Reference Guide Rev. 23
Display : Used to configure the information display
Clock : Displaying and setting of the current date and time
System : Displaying version info, system halt and reboot, reset
Netv4 : Network interface configuration
Lock : Locks the front panel keypad to prevent inadvertent operation.
Keypad menu tree
1.3 SecureSync Front Panel
password
spadmin
5