Rebooting The System - Spectracom SecureSync 1200 User Reference Manual

4.1 Powering Up/Shutting Down
2.
The Reboot/Halt window will display. Select the Shutdown the Unit checkbox.
3.
Click Submit .
4.
Wait 30 seconds after entering the HALT command before switching off the unit .
Once the HALT process has been initiated, the front panel LCD will display Power
offSecureSync , and the front panel LED time display will stop incrementing.
Issuing a HALT Command via Keypad/SerialPort/Telnet/SSH:
The HALT command can be initiated not only via the SecureSync Web UI, but also via the
keypad and LCD display. For more information on the keypad, see "Keypad and Information
Display" on page 4.
With a serial connection to the front panel serial port, telnet connection or SSH connection,
type
halt
mands, see "CLI Commands" on page 492.
Once the HALT process has been initiated, the front panel LCD will display Power off
SecureSync , and the front panel LED time display will stop incrementing.
4.1.4

Rebooting the System

To reboot SecureSync via the Web UI:
1.
Navigate to TOOLS > SYSTEM: Reboot/Halt .
218
<Enter> to halt the unit for shutdown. For more information on SecureSync com
After issuing the HALT command wait 30 seconds before you remove
Note:
power.
CHAPTER •
4 SecureSync User Reference Guide Rev. 23