Displaying Local Time; Creating A Login Banner - Spectracom SecureSync 1200 User Reference Manual

4.4 Miscellanous Typical Configuration Tasks
It is also possible to unlock the keypad without using the Web UI; see "Unlocking the Keypad
via Keypad" on page 251.
Enabling/Disabling the Position Display Screen
To enable or disable [DEFAULT = enable] the option to display geographic position data on
the information display, if so configured (see also
1.
Navigate to MANAGEMENT > OTHER: Front Panel .
2.
Check or uncheck the Allow Position Display checkbox.
3.
Click Submit or Apply .
4.4.3

Displaying Local Time

After physical product installation, a commonly requested scenario is for SecureSync to display
local time on the front panel (rather than UTC time). To learn more about this feature, see , and
"Configuring the Front Panel" on page 252.
4.4.4

Creating a Login Banner

A login banner is a customizable banner message displayed on the login page of the
SecureSync Web UI. The login banner can be used e.g., to identify a unit.
Figure 4-2:
To configure a login banner:
1.
Navigate to the MANAGEMENT > Network Setup screen.
2.
In the Actions panel on the left, click Login Banner .
3.
The Network Access Banner window will display. Check the box Enable Custom Ban
ner .
4.
In the Plain Text Banner text box, type in your custom text.
256
Login banner (example)
Allow Position Display
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
):