Spectracom SecureSync 1200 User Reference Manual page 255

d.
e.
The SSL certificates and/or client key you upload will be installed in the
tracom/xfer/cert/
Use the checkbox Enable Security if you want to enable SSL security, i.e. use Secure LDAP.
Use the checkbox Clean Security Certificates to remove all certificates currently stored on
SecureSync (e.g., to eliminate expired certificates).
LDAP Group Settings
Under the LDAP Group tab, you can filter access by group.
To enable group authentication:
a.
b.
c.
LDAP Advanced Settings
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
Locate and upload the certificate or client key file.
Click Submit .
directory.
Select the Enable group filter checkbox.
Enter information for:
Required Group —Enter the required group. Example. :
dc=example, dc=com
Group Attribute —Enter the group attribute. Example:
NSS base group —Enter the nss_base group. Example: ou=Group, dc=example,
dc=com?one.
Click the Submit button.
4.3 Managing Users and Security
.
member
/home/spec-
ou=Group,
.
239