Spectracom SecureSync 1200 User Reference Manual page 266

4.3 Managing Users and Security
B r o w s e r
Note that the
compatible clients include:
• Firefox
• Chrome
• Internet Explorer
• Safari
(This is not an exhaustive list.)
To enable High-Security HTTPS :
1.
Navigate to MANAGEMENT > Network Setup .
2.
In the Actions Panel on the left, click on Web Interface Settings . The Web Interface Set
tings window will open.
3.
Click on the tab Security Level :
4.
Read the Caution statement and verify that you meet the requirements stated.
5.
Check the box Enable High Security , and click Submit.
6.
While it is NOT necessary to close the Web UI, and restart the browser, it is recom
mended to wait 90 seconds before continuing to use the Web UI, in order to allow the
web server software to restart in the background.
It is also possible to disable High-Security HTTPS: Follow the procedure outlined above, but
un check the box Enable High Security .
For more information on HTTPS certificates, see "HTTPS" on page 61.
250
S u p p o r t
High-Security Level
requires the use of current browsers – as of July 2016, the oldest
®
27
®
30
®
11
®
9.
CHAPTER •
4 SecureSync User Reference Guide Rev. 23