Setting Up Snmp Notifications - Spectracom SecureSync 1200 User Reference Manual

Time & frequency reference system
Table of Contents

Advertisement

4.2  Notifications
To determine which GNSS Receiver Mode your SecureSync is using, see "Selecting a GNSS
Receiver Mode" on page 172.
To determine how many satellites your SecureSync unit is currently receiving, navigate to
INTERFACES > REFERENCES: GNSS 0 . See also "Reviewing the GNSS Reference Status" on
page 167.
To set the GPS Alarm Thresholds:
1.
Navigate to MANAGEMENT > OTHER: Notifications , and choose the GPS tab.
2.
At the bottom of the window, locate the ALARM THRESHOLD panel:
3.
In the Minimum Satellites fields enter the minimum number of satellites that must be avail
able before the alarm is triggered. The alarm will be triggered when the number of satel
lites available is BELOW this number.
4.
In the Duration Below Threshold (s) fields, enter the time in seconds that the system must
be below the threshold set in the Minimum Satellites field before an alarm is triggered.
The alarm will be triggered when this time is reached.
By default, this timeout value is set to 0 seconds: As soon as the receiver drops below the
minimum number of satellites, the associated alarm is triggered. A delay of e.g., 5
seconds, however, would not trigger an alarm if the number of received satellites drops
below the specified number for only 3 seconds.
You can configure this event to cause either a Minor alarm, or a Major alarm, or both.
To learn more about Minor and Major alarms, see "Minor and Major Alarms" on page 317.
Note that the GNSS receiver must initially be tracking more than the configured number of satel
lites in order for this alarm to be triggered (the alarm is triggered when the receiver falls below
the number of Minimum Satellites you specified above).
4.2.4

Setting Up SNMP Notifications

SNMP Notifications are SNMP traps that occur on a change of a monitored event.
To configure SNMP notifications:
224
Note:
While GPS Notification Alarms can be used in
Mode
, it is not advisable.
CHAPTER
4
SecureSync User Reference Guide Rev. 23
Mobile GNSS Receiver

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SecureSync 1200 and is the answer not in the manual?

Questions and answers

Cindy Dykstra
March 24, 2025

How to list all the client hosts on SecureSync 1200?

Related Products for Spectracom SecureSync 1200

Table of Contents

Save PDF