Spectracom SecureSync 1200 User Reference Manual page 512

APPENDIX
Command
rt6del
rt6get
saveconf
savelog
scaleget
scaleset
services
servget
servset
slaacget
slaacset
stateset
status
syncstate
sysupgrade
testevent
tfomget
timeget
timeset
unrestrict
version
yearget
yearset
zeroize
496
Deletes an IPv6 static route
Displays the configured IPv6 static routes
Generate archive of current configuration
Generate archive of all log files
Displays configured system timescale
Used to configure the system timescale
Displays the state of services (enabled/disabled)
Displays the state of individual services
Enable or disable specific services
Displays whether SLAAC is enabled
Used to enable or disable SLAAC
Enable or disable an entry in the reference priority table. index = 0...15. state = 0 (dis
able), 1 (enable)
Displays information about the oscillator disciplining
Display timing system synchronization state
Performs system upgrade using the update bundle provided
Generates SNMP events in the enterprise MIB
Displays current estimated system time error (TFOM – Time Figure of Merit)
Displays current system time (time is displayed in the configured timescale – See
scaleget command to retrieve the configured timescale)
Used to manually set the current time (hours, minutes in seconds); time is entered based
on the configured timescale – See
timescale
Used for clearing access control restrictions to SecureSync
Displays the installed main SecureSync and timing system software versions
Displays the current year
Used to set the current year
Applicable to SAASM-equipped SecureSync units only
Description
scaleget command to retrieve the configured
SecureSync User Reference Guide