Applying A License File - Spectracom SecureSync 1200 User Reference Manual

4.6 Updates and Licenses
2.
Free up disk space, if needed:
Under Tools > Upgrade/Backup > Disk Status , check Percent Used : If the number is
greater than
(NOTE: If required, existing logs can be archived; for details consult the above-men
tioned instructions for updating SecureSync software.)
To free up disk space:
3. Download
4.
Check if you have any of the following option cards installed:
If this is the case, see above-mentioned instructions for updating SecureSync software
(unless this has been addressed at an earlier update).
5.
Perform the actual upgrade by navigating to TOOLS > Upgrade/Backup > Actions :
Update System File : Upload the upgrade software bundle previously downloaded onto
your PC (
6.
Verify that the upgrade was successful: Tools > Upgrade/Backup , confirm the new SW
version.
4.6.2

Applying a License File

Software options like TimeKeeper, or Multi-GNSS must be
Typically, SecureSync units are shipped with the license file pre-installed, reflecting the system
configuration as ordered. If a feature is to be activated after delivery of the SecureSync unit,
please contact Spectracom Support or your local representative to have a license file gen
erated. License files are archive files with a
multiple licenses for multiple products.
To apply the license file, you need to upload it into your SecureSync unit and install it:
1. Save the license file
connected to the same network SecureSync is.)
304
70% , free up disk space.
a.
Delete old log files: Tools > Upgrade/Backup > Disk Status > Clear All Logs .
b.
Delete old statistics files: [~] > Clear All Stats .
c.
Delete previous Upgrade files: Tools > Upgrade/Backup > Actions > Update
System > Delete Upgrade File (s). Note that Delete Upgrade File and Update Sys
tem cannot be selected at the same time.
the upgrade software bundle onto your PC.
Simulcast (Model 1204-14)
PTP (Model 1204-12)
Gigabit Ethernet (Model 1204-06)
updateXYZ.tar.gz
In case the update failed, see
Note:
page 327 for additional information.
license.tar.gz
), and carry out the upgrade, as instructed.
"Troubleshooting Software Update" on
activated
extension. One license file may contain
tar.gz
to a location on your PC (which needs to be
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
by applying a license file: