Restoring The System Configuration - Spectracom SecureSync 1200 User Reference Manual

4.7 Resetting the Unit to Factory Configuration
4.
Click the Upload button. SecureSync saves the uploaded bundled file in the
/home/spectracom/xfer/config/
5.
To use the new configuration file for this SecureSync, click the Restore Configuration but
ton, and follow the procedure described under
below
4.7.2.4

Restoring the System Configuration

To restore the System Configuration:
1.
Navigate to TOOLS > SYSTEM: Upgrade/Backup .
2.
In the Actions panel, click Restore Configuration .
3.
Click OK in the grey confirmation window. The system will restore the configuration
using the bundled file stored at
/home/spectracom/xfer/config/
read the new configuration file. Once powered back up, SecureSync will be configured
with the previously stored file.
310
Note: When uploading files remotely via long distances, or when upload
ing multiple files via several browser windows simultaneously, the upload
process may fail to complete. In this case, cancel the upload by clicking X,
and go back to Step 2.
.
directory.
"Restoring the System Configuration"
SecureSync
.conf
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
, then reboot in order to