Local Clock(S), Dst; Setting Up A Local Clock - Spectracom SecureSync 1200 User Reference Manual

3.2 System Time
3.2.4

Local Clock(s), DST

The Local Clock feature allows for maintaining one or several local times. These times will
reflect a time offset, thereby accounting for Time Zone, and DST (Daylight Savings Time) cor
rection.
3.2.4.1

Setting Up a Local Clock

To setup a Local Clock:
1.
Navigate to MANAGEMENT > OTHER: Time Management .
2.
Click the PLUS icon in the Local Clocks panel in the Time Management screen.
3.
The Local Clock pop-up window will display.
4.
Enter a Name for your local clock.
152
Note: The Delete button in the
leap second has been set beforehand.
The name must be between 1 and 64 characters long; spaces are allowed.
The name can be any meaningful name that helps you know your point of ref
erence (for example: "NewYork", "Paris" or "EasternHQ", etc.).
This name will be used as cross-reference drop-down in the applicable Input or
Output port configuration. Please note the following limitations apply to this
option:
Edit Leap Second window will only be visible if a
CHAPTER •
3 SecureSync User Reference Guide Rev. 23