Resetting The Administrator Password When Forgotten/Lost - Spectracom SecureSync 1200 User Reference Manual

If the password has already been changed from the default value, but the current value is no
longer known, the administrator password can be reset back to the factory default value, see
"Resetting the Administrator Password When Forgotten/Lost" below. Once reset, it can then be
changed to a new desired value via the Web UI.
Changing the admin password
To change the admin password from a known value to another desired value:
1.
2.
3.
4.
5.
6.
4.3.3.2

Resetting the Administrator Password When Forgotten/Lost

If the current
been forgotten or lost, you can reset the
admin123
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
Note: To follow this procedure, you must be logged in as the
you are unable to login as
the Administrator Password When Forgotten/Lost"
Navigate to MANAGEMENT > OTHER: Change My Password .
The Change Password window will display.
In the Old Password field, type the current password.
In the New Password field, type the new password.
Note: The new password can be from 8 to 32 characters in length.
In the Repeat New Password field, retype the new password.
Click Submit .
spadmin
account password has been changed from the default value and has
.
4.3 Managing Users and Security
, follow the procedure outlined in
spadmin
below.
spadmin
password back to the factory default value of
user. If
spadmin
"Resetting
233